1. Start the engine (without this it doesn't work) .
2. Press and hold the odometer reset button - after a while (lest than 5 sec in my case) a yellow triangle with an exclamation mark in the center appears in the top display window between the clocks (where the outside temperature / time or date normally appears) - this is the "Service" icon.
3. Keep pressing until the first icon that needs service (the brake-fluid in my case) shows a little bit later (again less than 5 secs).
4. Release the odometer reset button.
5. Press once the BC (computer) button located on the high beam lever/arm.
6. The word 'RESET' appears at the bottom of the lower display window (it doesn't matter what the window was displaying previously).
7. Press and hold the BC button again for a few secs (less than 5) to reset the brake-fluid service interval for another 2 years.