Treci peste conţinut

  • Welcome Back Anonymous!
  • Acum este Dum Aug 09, 2026 9:09 am
  • Prima pagină ‹ Auto BMW (tot ce tine de BMW) ‹ Electronica
  • Schimbă dimensiunea fontului
  • Versiune printabilă

Salutare

Scheme Electrice si Electronice, Modificari ,Explicatii...Probleme...
Scrie un răspuns
4 mesaje • Pagina 1 din 1
  • Reclama

Salutare

Mesajde johnnybtd » Mar Dec 15, 2009 7:04 pm

Ati reusit sa-mi faceti rost de mufa aia sau mai caut eu? aia cu pini pentru AV
Daca se abureste un pic parbrizul in partea superioara si geamurile spre zona exterioara e semn sa schimb filtrele de polen?
Cum resetez oil service fara conectare testerul la masina ?
O seara placuta.
johnnybtd
 
Mesaje: 60
Membru din: Lun Noi 30, 2009 8:53 pm
Sus

Re: Salutare

Mesajde admin » Joi Dec 17, 2009 11:23 pm

Scuze ca nu am raspuns la timp dar e o perioada in care sunt cam prins, Mufa pentru pini(uitasem de ea) O sa tin una la mine in masina mereu ca sa ti-o dau cand ne intalnim.
Daca se abureste parbrizul de obicei e semn de multa umiditate in masina ( de multe ori radiatorul de la aeroterma are scurgeri si atunci apare abur pe geamuri) daca nu e mult si gras
la pipait nu e problema, nu mai pune aeroterma pe recilculare si deschide un geam foarte putin sa poata iesi umiditatea, asta e parerea mea nu o lua de buna.
Ca sa resetezi oil service?, Citeste Aici:(Reset procedure for high and low clusters with SIA III using the Reset Mode:
• Ignition key must be “off”
• Press and hold the trip odometer reset button in the instrument cluster (left button), and turn the ignition key to the first position.
• Keep the button pressed for approximately 5 seconds until one of the following words appear in the display: “OIL SERVICE, or “INSPECTION”, with “RESET”. The service due is shown with “reset” if the coded minimum consumption limit has been reached and resetting is possible. If “reset” is not shown, the minimum limit has not been reached and resetting is not possible.
• Press and hold the reset button again until the word “RESET” begins to flash.
• While the display is flashing, press the left button briefly to reset the service interval. After the display has shown the new interval the following will appear: “END SIA”)
BineInteles asta e valabil la E39 dupa 2001 care nu mai are mufa rotunda de diagnostic sub capota. O seara Placuta!
Avatar utilizator
admin
Site Admin
 
Mesaje: 108
Membru din: Vin Oct 02, 2009 12:12 pm
Locaţie: Bucuresti
  • Site web
Sus

Re: Salutare

Mesajde johnnybtd » Sâm Dec 19, 2009 11:57 am

Cu aburirea era de la condens in masina. Multumesc mult pentru mufa. Reset oill pot sa-l fac dupa 1300km. Ms mult pt ajutor. Acu astept sa-mi iasa afara bujia stau cu ochii pe ea :shock: :geek: sper sa am noroc. Daca nu o sa dau chiuloasa jos la primavara. Acel webasto tot nu porneste ai idee care ar fi prbl?
Week-end placut mai vb .
Ms mult pentru ajutor.
johnnybtd
 
Mesaje: 60
Membru din: Lun Noi 30, 2009 8:53 pm
Sus

Re: Salutare

Mesajde admin » Sâm Dec 19, 2009 10:41 pm

Trebuie vazut , o mai punem pe calculator odata si vedem ce are
Avatar utilizator
admin
Site Admin
 
Mesaje: 108
Membru din: Vin Oct 02, 2009 12:12 pm
Locaţie: Bucuresti
  • Site web
Sus


Scrie un răspuns
4 mesaje • Pagina 1 din 1

Înapoi la Electronica

Cine este conectat

Utilizatorii ce navighează pe acest forum: Niciun utilizator înregistrat şi 1 vizitator

www.walipet.ro
phpBB Dashboard
  • Autentificare
  • Înregistrare
  • FAQ
Google


Linkuri:
  • Prima pagină
  • Echipa • Şterge toate cookie-urile forumului • Ora este UTC + 2
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group | proGravity v3.0.4 - Design by Ika © 2009 ShadowFlames Development Translation/Traducere: phpBB România